วันพฤหัสบดีที่ 19 กุมภาพันธ์ พ.ศ. 2552

Microsoft is expanding and investing in Thailand

Microsoft is considering expanding its research and development capabilities in Thailand in various sectors, notably software development, high-performance computing and mobile computing, according to Microsoft (Thailand)'s Managing Director, Patama Chantaruck.

Patama said that in early March the president of Microsoft International and senior vice-president of Microsoft Corporation Jean Philippe Courtois will come to Thailand to announce Microsoft's collaborations and investments here. Courtois was introduced to Prime Minister Abhisit Vejjajiva at the World Economic Forum in Davos, Switzerland, who sat side-by-side with Bill Gates, co-founder of Microsoft.

Patama added that Microsoft (Thailand) will report directly at an Apac level, not an Asean level, as in the past, and the company sees Thailand as a semi-emerging country.

She said that in past three years, the company has grown from 100 employees to over 300 today, covering sales, marketing, localized language software testing and a new R&D division called Global Healthcare, which came into being when Microsoft acquired Bangkok-based company Global Care Solutions.

In addition, last year Microsoft established the Microsoft Innovation Center (MIC) as a creative hub, where technology and support are provided in such a way that users are able to conveniently share knowledge and implement proofs of concept for a wide range of new software. Technologies offered at the MIC already include an RFID reader, a fingerprint reader, Windows Mobile tablet PCs and high-performance computing.

Thailand also receives a share of Microsoft's US$500 million global funding for its Partners in Learning Project, in collaboration with the Education Ministry.

"The global economic crisis will affect all countries, but the new Thai government has already stabilized the situation here and we see a lot of potential, both in people and in the market. That's why we are still considering expansion here," Patama said.

Microsoft (Thailand) Software Design director Worapon Pitayaphongpat added that the company has started by recruiting 10 new people to supplement its new R&D customer service support technology team. This team works with teams in the United States and China, and there are about 70 people globally. The new team here will develop intelligent diagnosis software to automatically analyse software configuration problems for customers, especially SMEs who don't have IT support teams like big enterprises.

He believes that Thailand has many talented people, and a lot of Thai software engineers working in Redmond could relocate here.

"If Microsoft can recruit and develop successfully for research and development here, the company will use Thailand as an R&D hub, especially for software engineering in Asia when we expand to other countries."

Patama explained that Microsoft had recently signed a memorandum of understanding (MoU) with the National Electronics and Computer Technology Center (Nectec) on R&D, offering the latest Microsoft technologies in order to encourage long-term investment and growth in Thailand.

Pansak Siriratchatapong, director of Nectec, said the MoU with Microsoft was an important milestone to enhance further co-operation and collaboration on an R&D center here in the near future.

"This collaboration will take R&D in Thailand to the next level by working with external parties and implementing Microsoft technologies that can heighten our research standards and drive the country forwards with a range of challenging and innovative IT projects," Pansak said.

He believes that Thailand has promise for R&D in the mobile, education, agriculture and healthcare sectors. He expected that if this collaboration is a success, it will put Thailand in a very good position for software engineering research and development in Asia.

He emphasized that the global economic crisis slowed industry growth, and said that the Thai software industry was expected to grow 4.9 percent, to 65 billion baht (US$1.8 billion), compared to last year's growth rate of 11.2 percent. In these circumstances, he added, it's not so easy to undertake R&D without a partner or collaboration.

The director explained that under the MoU, both sides will send staff to form a joint committee to prioritise projects, then the first stage will cover accessibility technology and the Digitized Thailand project.

Microsoft will exchange information and technology to help disable people with sight, movement, brain or speech disorders to gain access to technology that can help them lead normal and fulfilling lives.

Microsoft will also offer its "Save as Daisy" technology, designed to be compatible with Microsoft Word 2007. Users can easily convert a Word document into the Daisy XML project format under the standard of Digital Accessible Information System (Daisy), which will benefit 300,000 people.

The director continued that Nectec will use e-heritage technology from Microsoft to put information into digital form especially folk wisdom about herbs, local games, traditional dancing, art and yoga in order to encourage people to experience the benefits of digital content and to prepare Thailand for a creative digital economy. Patama added that Microsoft helped Cambodia create 3D virtual maps for Nakorn Wat, Nakorn tom and this cooperation will digitize Thai heritage for a global market.

In the second stage, both sides will develop software to tackle city traffic problem to complement in Nectec's Intelligent Transportation System project, as well as mobile information system that can display agriculture prices in any mobile operating system people in rural areas such as farmers. In addition, they are looking at interoperating software for governmental and private use and to developing new software for testing applications.

Worapon said Microsoft is bring software testing functions to Thailand. The company is starting by testing localized versions of Exchange Server 2007 before launch. He will work with Nectec and Software Park Thailand, as well as academics, to set-up a software testing course to improve software skills.

"Software testing is an important aspect of software engineering, as well as software architect and project management," Worapon emphasized.

Khunying Kalaya Sophonpanich, Minister of Science and Technology, who oversaw the MoU, added the importance of the projects arising from this collaboration should not be underestimated.

In particular, the accessibility technology is a great example of how equal access to technology can bring about not only social benefits, but real long-term economic benefits. Indeed, even though many local and international analysts are predicting that the IT industry will be hard hit by the global economic crisis, projects such as these demonstrate that there are still great opportunities to strengthen and develop Thailand's software industry by using local expertise and initiating collaborative technology projects.

วันอังคารที่ 17 กุมภาพันธ์ พ.ศ. 2552

Make My Computer Faster

peed up that PC today

As your computer gets older and software programs update it seems your PC just get’s slower and slower. If you suffer from a slow computer don’t worry.This is not some buy me article, we will cover real ways to speed up your computer.

One of the first and probably the most helpful thing you can do is to get a computer tune-up. Just like cars computers need maintenance. You would never consider waiting years to change your car’s oil. If you did then your car won’t last that long. A computer should be tuned up yearly. While there are several online tools you can purchase to repair your registry and optimize your computer nothing beats a real expert taking a look at your computer.Computer Tune-up software has come a long ways but it’s still not as good as hiring a computer repair pro. Only a real pro will be able to look at the broader picture and let you know all the things you may need to consider. Even if that news is to buy a new computer. Places like this pc repair Company do a great job at repairing computer right online. This is a California based company and it’s like having the tech right in your home.This is really cool sutff, they remote into your computer and you can watch them as if they were there.This is by far my favorite online computer repair company because these guys always go that extra mile. It’s not hard at all with a service like this. It’s also cheaper then you think so check them out first.

There are other things you can consider as well. If this is you then consider a free 30 day trial of JV16 power tools. Just Google that name and you will see them pop up first. These guys offer a free fully functional trial for 30 days. It’s well worth the download. If you are not tech savvy then I would not use the program as it is very powerful stuff.

Another thing to consider is to max out your computer memory.As software gets more complicated your computer needs more RAM (Memory) to stay current. Google memory configurator and plug in your computer model into any memory configurator program and you will be able to see how much memory and what type your computer can use. This is one of the cheaper ways to get a little more life out of your computer.

If it comes down to it and you do need a new computer then consider checking out this how to transfer files site. Its good stuff and they have many guides on how to transfer files from XP to Vista and any computer to computer data transfer.

Drawing 3D Object in Adobe Illustrator

This Tutorial will show you how to draw simple objects with a three-dimensional appearance. At ?rst we will draw arrows indicating a movement in 3D space. Adobe Illustrator 7.0 was used to create the following graphics, but all procedures are valid for newer versions (up to CS2), too. Basics of Isometric Projection. Isometric projections are a two-dimensional drawing of three-dimensional objects, created by a parallel projection. Objects look like having a volume, without actually having one. The main characteristics of an isometric projection are: - there is no vanishing point - lines that are parallel in reality will be parallel in the drawing - same lenghts in reality will be drawn at the same length, without any shortening caused by a perspective view. An isometric drawing is created along the axes representing the 3D space: When the basic shape of the object (here: a cube) is drawn, the correspondig faces can simply be created by a double 120° rotation of the shape. Isometric objects can be created out of 2D shapes using the Distortion Tool. Since this tool produces non-proportional distortions (resulting edges have different lengths), this error must be corrected by applying a known scaling factor before distorting the shape. Now select the Distortion Tool. Enter a distortion angle of 30° along the vertical axis. This setting means, that vertical lines are just moved vertically, while horizontal lines are tilt by 30°. Without the preceding scaling, the horizontal lines would get longer than the vertical lines at this moment.

download

Mac or PC?

I have only just seen the new adverts from Microsot starring Bill Gates and Jerry Seinfeld. The latest ad campaign from Microsoft is an attempt to compete with the infamous Macguy adverts that people know and love.

I myself use a mac computer and I wouldn't use anything else. At work I use a pc and I can instantly tell the difference in usability and work flow and general coolness. There is no comparison. Getting work done on a mac is so much easier. Why? One answer is that it just works and thats that! Nothing will ever let you down on a mac. I have had my macbook for about a year and I have never had to call up "task manager" to close a program down, I have never had to take it into the mac store and tell them something has gone wrong, it has been my perfect tool in designing.

Don't get me wrong I know that windows can be useful, doesnt mean there any good though. However, it completely depends where and when you are using a windows machine. It is a known fact that in a battle between Microsoft and Apple Mac there is only one winner. Currently, it would have to be Microsoft unfortunately. It hurts me to admit this but it is an unfortunate fact. They have the market under their thumb only because of the fact they were first on the "scene" and have been for so many years. PC's are cheap, affordable and easy to chuck into a school, home, office for a couple hundred pounds.

A MAC requires a bit more thought and possible a slight touch of risk to buy it in the first place. People ask themselves about spending all that money, whether or not it is worth it or not. 'Will I be able to use it properly after being so use to a Microsoft personal computer?' This is the one and only the problem with anyone wanting to purchase a MAC. People are intimidated by the change of software. What people don't realise is that a MAC may cost slightly more money but the benefits are un-surmountable compared to a cheap old PC. You buy a PC and expect it to last for a few years if your lucky! I bought my own MAC and expect it to last for ten years, easily! So what is more expensive? Having to continuously buy more and more PC's over the space of ten years or just having one MAC that you know will last you.

It arguable to say that a lot of Microsoft software from the past had originally been based on Macintosh programming but that is still not confirmed. Either way, this battle between a MAC and a Windows machine will always rage on for many years to come! But I would personally never buy a Windows machine ever again in my life.

Reliable web hosting. Excellent cheap web hosting.
Did you like this? If so, please bookmark it,
tell a friend
about it, and subscribe to the blog RSS feed.

CNC Programming Coordinate System Setting

The position of terminal point of the movement command in the Z-axis can be shifted + or - by as much as the value set in the offset memory. This function can be used by setting the difference between the tool length assumed during programming and the actual tool length of the tool used when the work is performed into the offset memory. Direction of offset G43 + side offset G44 - side offset In any case of absolute or incremental command, the offset amount that has been set into the offset memory assigned by H-code is in G43, added to, and in G44, subtracted from the coordinate value of the terminal point of the axis movement command. The coordinate value after the calculation becomes the terminal point. Assignment of offset amount Assign offset number using H-code. The offset amount that has been set in the offset memory is added to or subtracted from the programmed command value for Z-axis. Note -1 When the offset amount is changed due to a change of the offset number, the offset value changes to the new offset amount, but it is not added to the old offset amount. Coordinate system shift G50, This command created a new coordinate system in which the coordinate (X, Z) of a point on the tool (i.e. Tool nose) on the current coordinate system correspond to (X + u, Z+ w). The X and Z values are diameter in case of diameter designation and radius in the case of radius designation.

download

CNC Programming Technique - TOC

CNC-programming-machine

This book was suitable for CNC learning, mechanical engineer, CNC operator, or programmer, in this book you will get any information about : Program Development Drawing , Drawing Evaluation Material and Stock Part Setup Part Reference Point Part Orientation Selecting Part Zero Tooling Selection Identifying Machining Operations Face Milling Contour Milling Circular Pocket Milling Slot Milling Spot Drilling Drilling Tapping Summary of Tools Used Machining Data Spindle Speed Cutting Feedrate Tooling Data Details of Operations Tool 1 - Face Milling Tool 2 - Outside Contour Tool 2 - Circular Pocket Tool 3 - Slot Milling Tool 4 - Spot Drilling Tool 5 - Drilling Tool 6 - Tapping Complete Program 2 - CALCULATING CONTOUR POINTS 23 Tools and Knowledge· Mathematical Knowledge Organized Approach Process of Calculating XY Coordinates Step 1 - Establish the Main Contour Points Step 2 - Fill-in the Coordinate Sheet Step 3 - Identify Calculation Zones Step 4 - Helpful Ideas for Calculations Step 5 - Calculations for Zone 1 Step 6 - Calculations for Zone 2 Updating Coordinate Sheet Writing the CNC Program.

download

CNC Programming Handbook, Third Edition (Hardcover)


Product Description

Over its first two editions, this best-selling book has become the de facto standard for training and reference material at all levels of CNC programming. Used in hundreds of educational institutions around the world as the primary text for CNC courses, and used daily by many in-field CNC programmers and machine operators, this book literally defines CNC programming. Written with careful attention to detail, there are no compromises. Many of the changes in this new Third Edition are the direct result of comments and suggestions received from many CNC professionals in the field. This extraordinarily comprehensive work continues to be packed with over one thousand illustrations, tables, formulas, tips, shortcuts, and practical examples.

The enclosed CD-ROM now contains a fully functional 15-day shareware version of CNC tool path editor/simulator, NCPlot(tm). This powerful, easy-to-learn software includes an amazing array of features, many not found in competitive products. NCPlot offers an unmatched combination of simplicity of use and richness of features. Support for many advanced control options is standard, including a macro interpreter that simulates Fanuc and similar macro programs.

The CD-ROM also offers many training exercises based on individual chapters, along with solutions and detailed explanations. Special programming and machining examples are provided as well, in form of complete machine files, useful as actual programming resources. Virtually all files use Adobe PDF format and are set to high resolution printing.

New and Updated Features of the 3rd Edition
- Detailed section on CNC lathes with live tooling, including examples - Image files of many actual parts, used as examples - More programming examples (both in printed text and on the CD-ROM) - Optimized for the latest Fanuc and related control systems - Additional formulas, calculations and handy reference material - Fourth axis programming (indexing and rotary) - Improved index for better search of topics

CNC Programming Circular Interpolation (Helical Motion)

CNC-programming
Content Inside :

CNC programming tutorial Circular Interpolation (Helical Motion) Circular Interpolation • G02, G03, I, J & K – G02: Circular interpolation (CW) – G03: Circular interpolation (CCW) – I, J & K (Use when <=360 degree) • Incremental distance from SP to CP of arc – I: Specifies the incremental ±X distance from the center of the tool at the start of the arc to the center of the arc. – J: Specifies the incremental ±Y distance from the center of tool at the start of the arc to the center of the arc. Why I, J & K instead of just R? • R is easier to define, easier to make a mistake and get an incorrect radius. • With R, the machine still do the work whether the R is correct or incorrect. • With incorrect I, J & K, the machine will stop and gives an error message before executing. • With R, to generate a circle path of over 180 degrees, then specify a negative R. Sample program (R and J).

download

CNC 8055/8055i Complete Programming Manual

Chapter 1 General concept : 1.1 Part programs 1.1.1 Considerations regarding the Ethernet connection 1.2 DNC connection 1.3 Communication protocol via DNC or peripheral device. Chapter 2 : Creating a program, 2.1 Program structure at the CNC 2.1.1 Block header 2.1.2 Program block 2.1.3 End of block. Chapter Axes and Coordinate system : 3.1 Axis nomenclature 3.1.1 Axis selection 3.2 Plane selection (G16, G17, G18, G19) 3.3 Part dimensioning. Millimeters (G71) or inches (G70) 3.4 Absolute/incremental programming (G90, G91) 3.5 Programming in radius or in diameters (G152, G151) 3.6 Coordinate programming 3.6.1 Cartesian coordinates 3.6.2 Polar coordinates 3.6.3 Angle and one Cartesian coordinate 3.7 Rotary axes 3.8 Work zones 3.8.1 Definition of the work zones 3.8.2 Using the work zones. Chapter 4 reference system : 4.1 Reference points 4.2 Machine reference (Home) search (G74) 4.3 Programming with respect to machine zero (G53) 4.4 Coordinate preset and zero offsets 4.4.1 Coordinate preset and S value limitation (G92) 4.4.2 Zero offsets (G54..G59) 4.5 Polar origin preset (G93). Chapter 5 Iso Code Programming 5.1 Preparatory functions 5.2 Feedrate F 5.2.1 Feedrate in mm/min or inches/min (G94) 5.2.2 Feedrate in mm/rev.or inches/rev (G95) 5.3 Spindle speed (S) 5.3.1 Constant surface speed (G96) 5.3.2 Spindle speed in rpm (G97) 5.4 Spindle selection (G28, G29) 5.5 Synchronized spindles (G30, G77S, G78S) 5.6 Tool number (T) and tool offset (D). Chapter 6 : Path Control : 6.1 Rapid traverse (G00) 6.2 Linear interpolation (G01) 6.3 Circular interpolation (G02, G03) 6.4 Circular interpolation with absolute arc center coordinates (G06) 6.5 Arc angent to previous path (G08) 6.6 Arc defined by three points (G09) 6.7 Helical interpolation 6.8 Tangential entry at the beginning of a machining operation (G37) 6.9 Tangential exit at the end of a machining operator (G38). CHAPTER 7 ADDITIONAL PREPARATORY FUNCTIONS. CHAPTER 8 TOOL COMPENSATION. CHAPTER 9 CANNED CYCLES 9.1 G66. Pattern repeat cycle canned cycle 9.1.1 Basic operation 9.1.2 Profile programming syntax 9.2 G68. X axis roughing canned cycle. CHAPTER 10 PROBING, CHAPTER 11 HIGH-LEVEL LANGUAGE PROGRAMMING. CHAPTER 12 PROGRAM CONTROL INSTRUCTIONS, CHAPTER 13 ANGULAR TRANSFORMATION OF AN INCLINE AXIS.

download

วันอาทิตย์ที่ 15 กุมภาพันธ์ พ.ศ. 2552

Bosch 4410L 15-Amp 10-Inch Dual Bevel Sliding Compound Miter Saw


Bosch 4410L 15-Amp 10-Inch Dual Bevel Sliding Compound Miter SawSliding Compound Miter Saw

Technical Details

  • 10-inch dual bevel compound miter saw with laser tracking
  • Wide miter range--52 degrees left and right; 15 amp; 4,800 rpm; 3-horsepower
  • Heavy cast-iron base; carbide-tipped saw blade
  • Includes saw, blade, dust bag, elbow wrench set, flip-over crown stops
  • 22-1/2-inch base and extenders to 37-1/2-inches long; 55 pounds; 1-year warranty

Product Description

Amazon.com Review
This is what a miter saw ought to be: accurate, sturdy, powerful, versatile, user-friendly and packed full of cool features.

If we had to choose a favorite aspect, it would have to be the handle. It’s vertical. It’s horizontal. And it’s a couple of other things in between. It locks quickly and easily into any of four positions, so both lefties and righties have complete comfort and control.

This saw is beefy -- it weighs in at 55 pounds and it’s got a nice, wide footprint that promises the ultimate stability, and sliding extensions bring your support area to 37-1/4 inches. If you’re in the market for a stand for this saw as well, we like both the Bosch TracRac as well as the DeWalt DW723.

The dual bevel is a great feature, swinging 47 degrees left and 46 degrees right, with positive bevel stops at 31.6 and 33.9 degrees for flawless crown molding cuts. For miter cuts, the blade swings an impressive 52 degrees left and 60 degrees to the right. There’s even a micro-fine adjustment here, letting you override a detent by as much as 2 degrees. Now that’s precision.

We absolutely love the fence on this saw – Bosch calls it a Speed-track sliding fence – because it’s a full 4 inches tall and has a beautifully readable inch-scale on it. It’s perfect for crown molding, handling pieces up to 6 inches wide when angled against the fence.

We’re suddenly rethinking our earlier statement about our favorite feature on this saw; on second thought, it might well be that all the controls – including the bevel lever – are up front. We’re pretty tired of reaching around a saw body to set a bevel, so this is a most welcome upgrade. Adjustments are so much faster and easier, and all the scales are right up front, too.

Capacities are generous, thanks to the slide, with a max cut of a 2-by-12 at a 45-degree bevel and 3-5/8 by 12 inches when the blade is upright.

And yes, this saw has a laser cutting guide, but unless you really want one, we wouldn’t let that sway a decision on this saw one way or the other. It’s a nice feature if you’re likely to use it, but most of us woodworkers prefer to get a visual on exactly where that blade meets the wood.

In all, this is a beauty of a saw, with features you aren’t going to find on other saws in its class. And we still can’t pick our favorite between the handle and the up-front controls. It’s all good. -- Kris Jensen-Van Heste

Product Description
10", Dual Bevel Slide Miter Saw With Up Front Controls & Laser Tracking, 15A Motor, 4,800 RPM, Up Front Bevel Lock Lever & Range Selector Knob, Easily Accessed Controls For Quick & Acccurate Bevel Settings, Arbor Mounting Laser Tracking, Provides Accurate Laser Lines For Precision Cuttting, Multi Positioned Main Handle, Easily Locks Into Any Of 4 Positions For Optimum Comfort & Control, Crown Miter Detents, Exclusive Wedge & Slot Miter Detent Sysytem.

BOSCH RA1181 Benchtop Router Table

BOSCH RA1181 Benchtop Router Table


Technical Details

  • Benchtop router table; attaches to any workbench
  • 2 adjustable featherboards; dust collection port; dual outlet switch; 6-foot power cord
  • Aluminum fence with MDF face plates; aluminum router mounting plate
  • Includes router table, 3 mounting plate insert rings, mounting hardware for most Bosch routers, 2 featherboards, adjustable clear guard, starter pin and guard, outfeed fence shims
  • 27-inch by 18-inch work surface; 1-year warranty

Product Description

Amazon.com Product Review
A benchtop router offers significant advantages over a handheld machine. It's safer, because you're moving the wood over the bit instead of the other way around. It's also versatile, allowing you to do a number of cuts that aren't possible with a handheld. And because it has a fence, it gives you a degree of control and precision that is simply impossible with freehand routing.

Because you're sliding the wood across the surface of a bench router, it's important that the surface be as frictionless as possible. The RA1181 features a generous 27-inch long by 18-inch wide table that's made out of slick but durable cast aluminum. In addition, he surface near the fence is rough-ground to minimize surface contact, which further reduces friction.

Though the caveat "some assembly required" applies here, the manual is clearly written, and I found the setup process to be straightforward. Once fully assembled, the RA1181 attaches to just about any workbench via the leg assemblies, which have flat "feet" that you can clamp to the table. You can also use the pre-drilled holes to screw it to your work surface if you don't need it to be portable. (Note that most benchtop routers need to be mounted on a smaller table-using a standard worktable may leave it uncomfortably high.)

Once secured to the table, the RA1181 is very stable, and can handle high-horsepower routers and larger work pieces without bucking. The cast aluminum mounting plate accepts a variety of routers-and not just those made by Bosch. The fence is good and rigid, and is adjustable from 0 to 3-3/4-inches wide.

This is a great little machine, and its portability and capacity for bigger jobs makes it as good a fit on the job site as it is in the home workshop.--Josh Dettweiler

What's in the Box
Two adjustable featherboards, three mounting plate insert rings, one adjustable clear guard, one starter pin and guard, two outfeed fence shims (1/16-inch thick), appropriate router mounting hardware

Bosch 1590EVSK 6.4 Amp Top Handle Jigsaw

Bosch 1590EVSK 6.4 Amp Top Handle Jigsaw
Bosch 1590EVSK 6.4 Amp Top Handle Jigsaw
Purchase at least $50 worth of power tools sold and shipped by Amazon and get a woodworking or home magazine at 50% off
It’s a funny thing about jigsaws; most of us tend to reach for another tool in its stead, having had less-than-great experiences with the little beasts.

But here comes Bosch’s 1590, and it elevates the outcast jigsaw to the most-wanted list.

The first thing we liked about this saw is its heft; it’s beefy, solid and made with that famous Swiss quality. You wrap your hand around the soft, substantial grip, squeeze the ample trigger and the soft-start whirs gently; with hardly any effort from you, the blade slices through whatever’s ahead of it. Perhaps because it’s heavier than most jigsaws, there’s practically zero vibration, giving you a delightfully smooth, no-buzz experience, something pretty much unheard of in your average jigsaw.

Another nice feature is the speed mechanism: Set your maximum speed on the trigger dial, then control your speed up to that max by squeezing the trigger. On long cuts, you can lock the trigger on, too, and the blower actually does keep your cutline clear.

If that’s all this saw had going for it, that would be enough for us. But coolest of all is the blade-change system that literally ejects the blade in a split second, takes the new one and gets you right back to your cutting – all tool-free. Amazing.

If you’ve relegated the jigsaw to the bottom of your toolbox, you owe it to yourself to give this one a chance. We think it’s fantastic. --Kris Jensen-Van Heste

วันพฤหัสบดีที่ 5 กุมภาพันธ์ พ.ศ. 2552

Rolling Stones, Satisfaction, Cloud9 Bar, Soi 8, Pattaya

Rolling Stones, Satisfaction, Cloud9 Bar, Soi 8, PattayaRolling Stones, Satisfaction, Cloud9 Bar, Soi 8, Pattaya

Cloud Nine Bar, Soi 8, Pattaya, Thailand

Cloud Nine Bar, Soi 8, Pattaya, ThailandTrip Travel Holiday Vacation Thailand Thai Pattaya Siam Summer Soi Fun Minja Serbia Cloud Nine Bar adventure travel log destination culture cruise cityscape nature landmark events museum bar girls girl lady ladies sex sexy bbc

Pattaya, Addicts Cherry Bar Party

thailand bangkok jimsuayuk pattaya sexy dancing girls patpong patong nana plaza thai ass pussy koh larn samui samet phuket flipper house soi walking street beach agogo cherry flb secrets insomnia mandarin

loud Nine Bar, Soi 8, Pattaya, Thailand

loud Nine Bar, Soi 8, Pattaya, Thailand

TG bar Pattaya Thailand

TG bar Pattaya Thailand
Lovely would be hospital in Pattaya where you feel happy with the lovely nurses...

วันอังคารที่ 6 มกราคม พ.ศ. 2552

CNC Machining high speed

CNC Machining high speed

Mastercam's High Speed Machining

A compilation of CNC cutting using Mastercam's high speed machining toolpaths.

cnc programming

CNC Stomp Pad 5 - Mach 3 G-Code - Learn CNC Plasma CuttingIn this video we go through Mach 3 to look over the g-code. We are checking to see if we have any problems before we go to the CNC Plasma Cutter.

CNC Metal Spinning

Ferdowsi University of Mashhad
CAD/CAM Workshop
CNC Metal Spinning
By: Ali Asmari (B.S. Mechanical Engineering) & Amir Mohammad Ghandeharioun (B.S. Mechanical Engineering)
Under Supervision of: Dr. Behnam Motakef Imani
Special Thanks to: Reza Nejatpour

custom cnc programming

Metal Spinning Lathe CNC AutomaticThis is a custom built spinning lathe used to spin form parts from flat metal blanks.
We engineered & built the machine to meet the customer's requirement of 3" to 46" diameter, and a draw depth up to 24".
It can accept a CNC program from disk, or a program can be created and/or modified using an SS Systems Mach3 custom screen via the onboard programming console, or can be programmed manually using the dual MPGs on the pendant, the moves can then be recorded and saved as G-Code moves to create a part rendering program. In fact, the program you see running on the machine was made in less than 15 minutes using the record/playback moves command, and then spin formed the 1,000 parts that are being stacked at the end of the video.
The machine is servo powered and ballscrew actuated, (except the tool changer which is gear driven), has a 0 - 2,750 RPM spindle with 4 programable quick select run speeds, adjustable DC braking via a variable frequency drive, and 2 manual trimmers.
Do you need a custom machine? We can help, we love this stuff!

CNC Stomp Pad 9 | Drill Holes | CNC Learning Videos | CNC

In this video we drill the holes in our CNC Stomp Pad. We need to add the traction spikes and they are really a screw and nut. We drill the holes then clean them out.
We bend the stomp pad while drilling and we must hammer it flat next.
A quick DA Sanding to make the pad look good, then we are on the the next step which is finalizing the CNC stomp pad.

learning cnc programming

Learn CNC Programming with Heinz PutzThe Center for CNC Eductation offers a series of training DVDs to learn CNC programming. Taught by Heinz Putz who has over 30 years of experience working and teaching in the field and who literally "wrote the book" for Fanuc while employed there.

OM5 CNC's answer to the big nine.

Legacy's OM5 CNC takes on nine major challenges facing any woodworking business.

rotary axis g-code cnc programming

Thermwood Corp. CabinetShop 45 Rotary Axis Machining Leg

jobs cnc programming SUN Tech Wood Products Manufacturing

jobs cnc programming SUN Tech Wood Products ManufacturingAdvanced Wood Products Manufacturing students are educated and trained to be quality machine operators, production workers and technicians. In our geographic area, wood products manufacturing remains one of the top career fields. Students study industrial product planning and automated manufacturing methods. Students learn traditional machining and production methods, as well as state-of-the-art CNC routing and boring. Students are instructed in basic CNC Programming, Computer- Aided Design and program storage and retrieval. Instruction is given on materials, layout, print reading, construction methods, plastic lamination, shaping, sanding, finishing, cost estimating, jointery, plant safety, and worker safety. In addition, students receive instruction in Welding, Precision Machining and Drafting/CAD Technology because all of these programs are part of the Manufacturing Cluster at SUN TECH.

วันพฤหัสบดีที่ 1 มกราคม พ.ศ. 2552

Minisiam Pattaya images views

Minisiam Pattaya images views
Minisiam Pattaya images views
Minisiam Pattaya images views
Minisiam Pattaya images views
Minisiam Pattaya images views

Mini Siam Pattaya views

Mini Siam Pattaya views
Mini Siam Pattaya views
Mini Siam Pattaya views

Mini Siam Pattaya viewsMini Siam Pattaya views

Mini Siam

Mini Siam
Mini Siam
Mini Siam
Mini Siam
Mini Siam
is on the left hand side at kilometer 143 on Sukhumvit Highway. This miniature city offers replicas of 80 sacred places and important historical sites around Thailand at a scale of 1 to 25. Some examples are the Temple of the Emerald Buddha, Wat Sisanphet, Anantasamakhom Throne Hill, Phra Phutthayotfa Bridge, the Bridge over the River Khwae, the Golden Stupa and Phimai Khmer Sancturary. Replicas of places of world significance are also displayed in the "mini-world" area such as the Eiffel Tower, the Statue of Liberty, Tower Bridge, Trevi Fountain.
Open daily from 7 a.m.-10 p.m. There is also a Mini Race Course (Go-karts) for visitors wishing to try their hand at racing fast cars. Additional information may be obtained by calling (038) 421628, 424232 (Pattaya) or 271-1896, 616-1533 (Bangkok),

Wong Phrachan Beach

Wong Phrachan Beach
Wong Phrachan Beach
Wong Phrachan Beach
Wong Phrachan Beach
Wong Phrachan Beach
is on the northern side of Pattaya Bay. The 1 kilometer beach shares the same entrance as the Central Wong Amat Hotel. A quiet spot, the beach is ideal for swimming and relaxation.

Jomtien Beach

Jomtien Beach
Jomtien Beach
Jomtien Beach

Jomtien Beach  This 6-kilometres long, largely straight beach, some 4 kilometers south of Pattaya, is the most notable of several beaches south of the resort. The beach is popular with windsurfers and water sports enthusiasts, largely because the area enjoys brisk and fresh breezes sweeping inland from the Thai Gulf, and because the seas are less congested with boats than is Pattaya Bay. Jomtien is also a major residential area with beachside hotels, bungalow complexes, condominiums and restaurants.

Experiencing Pattaya Beach, Thailand

Pattaya Beach, Thailand
Pattaya Beach, Thailand
Pattaya Beach, Thailand
Pattaya Beach, Thailand
Pattaya Beach, Thailand
On a Saturday morning, we got on a trip to Pattaya from Bangkok. After a few hours of early morning shopping at the Pratunam wholesale market, we arranged for a taxi to take us to Pattaya. As we were pressed for time, we decided to take the hotel taxi offered at 3,000 baht to take us to Pattaya.

We left Indra Regent Hotel at about 930am, ready for a Pattaya experience. We planned to spend the whole day there. We prepared an itinerary beforehand, and we had a list of the must-visit places and sights. The trip was a bit long. It took about 2 hours, and we arrived in Pattaya Beach just in time for lunch.

There were a lot of restaurants to choose from, and plenty of them were offering European and Thai food at the same time. As we were hungry when we got to Pattaya, our driver took us to the beach side to look for a restaurant. We settled for a simple cafe that served Thai food. The staff were very friendly. They even gave us a free map to guide us in Pattaya, since our driver wasn't too familiar with all of Pattaya's places. We ordered our favorite Thai dishes -- Pad Thai Noodles, Tom Yum soup, Chicken with Cashew and Thai Milk Tea. The food was very delicious! I swear, no one could go wrong with these dishes in Thailand.

Pattaya Beach Thailand food experience

After a hearty lunch, we decided to check out the Pattaya beach before heading to Nong Nooch Gardens. We just had to cross the street from the restaurant to head over to the beach. The sight that greeted us was this:

Pattaya Beach Thailand

People were sitting next to each other under large beach umbrellas. People were pretty much doing their own thing. Those in groups chatted with each other. There were people who read books as they relaxed by their beach chairs. There were some who were getting massages on the sand near the sidewalk. It was pretty crowded! The shore was filled up with all these people that you can barely walk by the shore to get a clear view of Pattaya Beach. The first row of beach chairs were already very near the water, and it was hard to move without passing by people.

Seeing this scene dropped my expectations of Pattaya beaches. I hope this doesn't hold true for all of Pattaya beach, since I've only explored one part of Pattaya. I was really very surprised that the beach was so crowded that people could hardly enjoy the sights that Pattaya beach offered. This made me appreciate the Philippines' own set of beaches more. Most of our beach destinations may not be as popular as Pattaya Beach Thailand, but we could definitely get a better experience of the sea and sand as our beaches are not too crowded like this.

Check out these links to my posts on some beach destinations in the Philippines:

Pattaya Beach


Pattaya Beach

Pattaya Beach
Pattaya Beach
Pattaya Beach some 4 kilometers long, this beach faces Pattaya Bay, the major venue from where boats visit Pattaya's offshore islands. The beach curves from north to south and is largely paralleled by a tree-lined promenade and beach road, which is lined, in the northern and central parts, by hotels and restaurants.
The northern section of the beach is largely tranquil, while the central and southern parts become increasingly lively, thanks to a juxtaposition of shops, department stores, boutiques, beauty salons, supermarkets, bars, discotheques, restaurants and night clubs. The central area of the beach is a major shopping area, while the southern end is one of Pattaya's major nightlife areas.

Sex in Pattaya, Sexy Thai Girls in Pattaya, Sexy Pattaya Girls

Sex in Pattaya, Sexy Thai Girls in Pattaya, Sexy Pattaya Girls


There are hundreds of websites about Pattaya. Websites about hotels in Pattaya, websites about bars in Pattaya and yes websites about sexy Thai girls in Pattaya. Seek and you will find.

This site is more about the practicalities of living here, yes I live here well just over the hill in Jomtien beach anyways.

So I plan to put up some resources, write some articles, answer some important questions like:
Where can I buy Yorkshire Puddings in Pattaya?
Where is the best Buffet?
Where is the best English breakfast?
Where are the sexiest girls? - whoops I said I wasn't going to talk about sexy girls. Ah well didn't take long to stray from the straight and narrow did it. Living in Pattaya warps the mind somewhat. You go out in the morning for a good breakfast nosh at the Apex and as you walk out a sexy lady emerges from the lift just finishing her "night shift" so to speak. She smiles, you smile and all thoughts of shopping in the market fly out the window.

So always good to know the essential information like:
Where is the best shortime hotel close to the Apex?
Answer - easy - The Apex has rooms for 550 Baht in low season. So why waste time looking for a short time hotel for 300 Baht for two hours when you are in the foyer of a hotel that charges 550 Baht for long time.

Make the day of it, relax, long time is better. Call the girlfriend and tell her you had an emergency call from the office in Bangkok and you got to rush to the bus station. Don't be shy, dont be embarrased. Thai girls are born to lie - get your own back and don't feel guilty as you turn the girl around give her a playful slap on the bum and steer her back up in the lift.

Prostitution in Thailand - A Historical Perspectice

Prostitution in Thailand - A Historical Perspectice
The journal of a 17th-century Austrian merchant offers a lopsided view of Siam's lewd ladiesPublished on July 22, 2007

Inhabitants of Pattani, published in 1682There are few things that raise Thai hackles more than hearing their beloved country branded by foreigners as a sex paradise.
Yet this reputation does not date back, as one might imagine, to the Vietnam War, when American serviceman flooded into Bangkok and Pattaya for rest and recreation and the sex trade thrived.

In fact, the image can be traced back to the 17th century when junk merchants regularly passed through the kingdom. Christoph Carl Fernberger von Egenberg, for example, described Siamese women as "excessively lewd".

"They are always approaching the men and urging them to go with them into their houses and have sex with them," he wrote in his diary, which was discovered in 1972.

Fernberger arrived in the harbour of Ayutthaya in November 1624 during the reign of King Songtham. He was 26 at the time. His accounts of his travels in the region, which include Siam and Pattani, are almost unknown to foreign scholars but many Austrian historians believe Fernberger was the first of their countrymen to set foot in the two Southeast Asian harbour cities.

The first Austrian in Ayutthaya was impressed by the wealth of the kingdom and the wise rule of the Siamese king as well as his "open door policy" and strict law enforcement, says associate professor Helmut Lukas who recently talked about Fernberger's diary at a Siam Society lecture organised in cooperation with Chulalongkorn University's Centre for European Studies.

Lukas, however, doesn't agree with Fernberger's perspective of the women in Ayutthaya.
"Like any big port, Ayutthaya had a well-established prostitution ring catering to foreign seamen. But it would be wrong to assume that their behaviour was indicative of Thai women of that era," says Lukas, an academic with the Social Anthropology Research Unit, Centre for Studies in Asian Cultures, Austrian Academy of Science.

As an independent observer with no obligations to a trading company, Fernberger's diary may offer an alternative perspective to the often one-sided Dutch sources, the Austrian anthropologist adds.

"But his pages on the women in Ayutthaya were based on his impressions of a very limited area, which he wrongly extrapolated to the entire country," Lukas points out.

Unfortunately, many Dutch merchants held similar views of the woman they took as their "wives" in Ayutthaya, according to professor Barbara Watsan Andaya, author of the paper "From Temporary Wife to Prostitute: Sexuality and Economic Change in Early Modern Southeast Asia" published in the Journal of Women's History in 1998.

"VOC employees in Ayutthaya even referred to their 'wives' as whores, sluts and trollops and the like," writes the professor of History and Asian Studies at the University of Hawaii.
While researching her paper, Andaya discovered that other than several works covering prostitution, no historical investigation has been carried out into the changing attitudes toward sexuality in Southeast Asia, despite the fact that the "high status" of women is often cited as characteristic of the region.

Siamese women in the 17th century are also mentioned in the diary of French ambassador Simon de La Loub่re, who arrived in Ayutthaya some 30 years after Fernberger.

The ambassador writes in his memoirs about a brothel in the capital of Ayutthaya, which was home to some 600 women from different levels of society, including the daughters and wives of the court's noblemen.

La Loub่re, who was in Siam during the reign of King Narai, also relates how prostitution tax, collected from those with permission to run brothels, was first imposed in this reign and that the largest brothel was run by one of the king's noblemen.

Prostitution in the port city of Pattani is also mentioned in the journals of several 17th-century foreign traders. The Dutch merchant Van Neck, who arrived in Pattani in the early 1600s, describes the women at the harbour and their services.

"When foreigners come from other lands to do their business…men come and ask them whether they desire a woman. The young women and girls also come and present themselves, from whom they may choose the one most agreeable to them, provided they agree what he shall pay for certain months. Once they agree about the money (which does not amount to much for so great a convenience), she comes to his house, and serves him by day as his maidservant and by night as his wedded wife."

For his part, the foreign trader had to agree not to consort with other women while the temporary wife was similarly forbidden to converse with other men. The "marriage" was deemed to last for as long as the man kept up his residence, "in good peace and unity".
Fernberger, who arrived in Pattani in December 1624, wasn't interested in hooking up with a woman at the harbour. His attention was on the female ruler with whom he had been granted an audience.

Pattani was under the rule of Raja Ungu, the third of four successive queens to take the throne. Fernberger describes her as an absolutist ruler who did not listen to any council.
In his diary he describes the royal entourage of 200 women. As a sign of royal power, she kept about 50 elephants and possessed some 50 men who she used for her sexual pleasure.
Lukas says the women of Pattani, and especially the queen, enjoyed many liberties.
"This proves that being a Muslim doesn't mean being "macho" or a misogynist.

The gender equality in the old Pattani kingdom sets an example for modern times," he says.
But some of Fernberger's accounts about the queen are much less credible.

Lukas smiles as he recounts Fernberger's reason for leaving Pattani.

He writes that after being granted an audience with Raja Ungu, she provided him with a house and 10 slaves. He later helped her fight the Siam invasion in January 1625 in which Pattani won the battle. The young Austrian describes how the queen expressed her gratitude by sending him a present and passing on a message that she would visit him at night.

"Fernberger says a Malay colonel gave him to understand that the queen intended to make love with him. As he'd heard that men who had failed to meet her high expectations were ordered to be killed, Fernberger clandestinely sneaked down to the shore, boarded a small sailboat and went back to Ayutthaya.

His stay in Pattani lasted 71 days," says the professor, laughing.

Subhatra Bhumiprabhas - The Nation

Centrals Pattaya Hotels Promotion

Pattaya Hotels Promotion
Loma Resort & Spa Pattaya
Loma Resort & Spa Pattaya
View Map
From 31 USD
Stay 7 Nights Pay 6 Nights  !!! Stay 7 Nights Pay 6 Nights !!!

     Loma Resort & Spa - Your home away from home where you can relax under the tropi ... More Detail







Average User Rating :



(4 From 5.0) (Review)



Sunshine Hotel Pattaya
Sunshine Hotel Pattaya
View Map
From 25 USD
Stay 7 Nights Pay 6 Nights  !!! Stay 7 Nights Pay 6 Nights !!!

     Sunshine Hotel offers affordable yet comfortable accommodation in the center of ... More Detail







Average User Rating :



(4 From 5.0) (Review)



Sunshine Residences Pattaya
Sunshine Residences  Pattaya
View Map
From 30 USD
Stay 7 Nights Pay 6 Nights  !!! Stay 7 Nights Pay 6 Nights !!!

     Sunshine Hotel & Residences, located in the center of Pattaya’s famous Soi 8 nig ... More Detail







Average User Rating :



(4.4 From 5.0) (Review)



Sunshine Vista Serviced Apartment Pattaya
Sunshine Vista Serviced Apartment Pattaya
View Map
From 38 USD
Stay 7 Nights Pay 6 Nights  !!! Stay 7 Nights Pay 6 Nights !!!

     Sunshine Vista Serviced Apartment offers the spacious comfort of a private resid ... More Detail







Average User Rating :



(4.2 From 5.0) (Review)